If you happen to be viewing the article Water Clock Experiment – Working Principle, Types and Procedure to Make a Water Alarm? on the website Math Hello Kitty, there are a couple of convenient ways for you to navigate through the content. You have the option to simply scroll down and leisurely read each section at your own pace. Alternatively, if you’re in a rush or looking for specific information, you can swiftly click on the table of contents provided. This will instantly direct you to the exact section that contains the information you need most urgently.
Water Clock Working Principle
Clocks have been in use for several centuries of human existence to measure time. While it is known that mechanical clocks had come into existence in the 13th century, it is believed that the first people to make use of devices to tell time were those from Egypt and Iraq. The accurate time, when these devices were invented is unknown but they worked on the principle of the position of the sun and thus were called ‘sundials’ otherwise known as sun clocks. Over time, sun clocks became more and more accurate and were extensively used until the late nineteenth century. It was during 1400 BC that water clocks saw light. These sophisticated instruments, invented by the Egyptians, have marked a new invention in human history.
What is a Water Clock
In simple words, a water clock is an instrument that uses the flow of water to measure time. They are quoted as one of the earliest time measuring devices that did not depend on the observation of celestial bodies. The earliest water clock was found in the tomb of Amenhotep 1, who was buried at a time around 1500 BC. Early water clocks consisted of bowl-like stone vessels that allowed water to drip at a constant rate from a small hole at the bottom. Hours were measured using markings in the inner surface of the container.
More mechanized and sophisticated water clocks were developed between 100 BC and 500 AD. They had a better regulation of pressure, leading to a more constant rate of flow. This was the era that also saw water clock designs, that was fancier with small figures of people or birds popping out to signify the passage of an hour. Other improvements were the changes in pointers and adjustments in dials.
Types of Water Clocks
There are two types of water clocks. They are:
-
Outflow water clock- In an outflow water clock water fills up a container and drains out of it after the time it is designed to signify. An observer can distinguish the time by following the markings on the container which holds the water.
-
Inflow water clock- An inflow water clock works on a similar principle to an outflow water clock except that after the passage of time water flows into the container rather than out of it. Here an observer could follow the level up to which water has filled up to tell the time.
Water Clock Working
A water clock works by using the controlled flow of water to time. There are several types of water clocks that work in different methods. The working of a simple water clock consisting of bowls is elucidated.
-
The bowls of a water clock would be arranged in series.
-
At noon all the bowls would be empty.
-
Each successive hour, one bowl would get filled.
-
After the completion of an hour, water would overflow from the lip of a bowl into the next bowl.
-
The detection of the passing of an hour, half, and quarter of an hour would be simple using this method due to filling up and markings respectively.
-
However, to accurately point out 5 minutes and more precisely each minute would be a difficult task requiring mastery.
How to Make Water Alarm
The steps involved in making a water alarm are elucidated below.
Things Required:
-
Three bottle caps
-
Unusable sketch pen
-
Buzzer
-
Superglue
-
9V battery and connector
-
Aluminum foil
Procedure:
-
Glue together two bottle caps such that they resemble one.
-
Make holes through the pair of caps, the third cap, and a piece of aluminum that is of similar size, such that the holes are just enough to fit the sketch pen into them.
-
Stick the sketch pen to the third cap.
-
Glue together the two caps duo to the foil piece.
-
Fit the caps duo and foil to the pen and affix them on the other end of the sketch pen.
-
Use a piece of plastic to prevent the cap from falling.
-
Fix one end of the buzzer to the negative terminal of the battery.
-
Glue together the positive terminal of the battery and the other end of the buzzer to the bottle caps at either end of the pen using connecting wire and small pieces of aluminum foil if necessary.
-
Partially immerse the pen in water with one cap floating on water and one cap affixed at the top of the water container.
-
Set a water clock using this container to measure time.
-
Adjust the cap on the top of the container to the desired time to ring the alarm.
Thank you so much for taking the time to read the article titled Water Clock Experiment – Working Principle, Types and Procedure to Make a Water Alarm written by Math Hello Kitty. Your support means a lot to us! We are glad that you found this article useful. If you have any feedback or thoughts, we would love to hear from you. Don’t forget to leave a comment and review on our website to help introduce it to others. Once again, we sincerely appreciate your support and thank you for being a valued reader!
Source: Math Hello Kitty
Categories: Physics
